It is undoubtedly true that Rockspace extenders are one of the best and most amazing networking devices in this modern era. With its help of it, millions of people get blazing-fast internet throughout their houses. But, sometimes extender causes the issues that users frequently encounter. Recently some users face Rockspace WiFi extender not connecting to the router issue due to some possible reason. If you are also sailing on to the same boat and looking for appropriate guidance then you have come to the right place. In this article, we are going to tell you about the reasons behind this issue and also provides troubleshooting tips to fix it. Now, let’s start without further ado!
Reasons: Rockspace Extender Not Connecting to Router
Here we discuss some common reasons with you that mostly cause the extender not connect to the router issue. By knowing the reasons you will easily fix the issue and also remove it from its roots.
Improper Power Supply
The very first common reason is an unstable electricity supply. Maybe your extender does not get the sufficient power supply from the wall outlet that it needs to make the connection with the router.
Technical Glitches
The second most possible reason is temporary hiccups in the networking device. When the device becomes the victim of glitches, it stops working properly.
Outdated Firmware
Obsolete firmware version also causes issues in the device. If your device running into outdated firmware then it is obvious your extender not connecting to the router.
Broken Ethernet Cable
There is a chance that the LAN cable you use to make the connection between the extender and the router is broken and defective somewhere.
Excessive Distance
The long-distance between the extender and router also leads to the extender not connecting to the router issue because long-distance devices are not able to communicate with each other properly.
Thus, these are the contributing factors that mostly cause the issues in the extender. To fix this issue you can implement the further mentioned troubleshooting tips that work effectively and quickly.
Solutions: Rockspace Extender Not Connecting to Router
Before you do any time-consuming troubleshooting step we would like you to reboot your device first. By doing this you will fix the small bugs from the device and also removes the temporary hiccups. Below we give the proper instructions that you can follow to reboot the device.
- Initially, turn off the Rockspace extender by pressing the power button.
- Remove the extender from the socket.
- Now you have to wait for some time until the device recovers from hiccups.
- Plug the extender back into the socket.
- Turn it on by pressing the power button.
That’s it your device has been rebooted successfully. Now you can try connecting your extender to the router by accessing the Rockspace_ext or using an Ethernet cable to ensure the issue is resolved or not. If not then, move to the next possible solutions.
Check Hardware Connections
Ensure that the Rockspace extender is properly plugged into a power outlet and turned on.
Verify that the Ethernet cable (if applicable) is securely connected between the extender and your router.
Check the Distance
Make sure the extender is placed within a reasonable distance from your router. It should be close enough to receive a strong signal but not too close to avoid interference.
Reset the Extender
If none of the above solutions work for you then it’s high time to set your device to its default factory settings. Sometimes, a simple reset can resolve connectivity issues. Press the reset button on the extender and hold it for about 10-15 seconds. The extender will reset to its default settings.
Hence, these are the hacks that you can use to fix the Rockspace extender not connecting to the router issue. Once the issue is resolved you will get the best internet speed from your device throughout the house.
